Filter By:
- Handlebars (167)
- Headsets (128)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Handlebars & Headsets

$149.99
Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems.
FEATURES:
- 22.2 Bar Bore
- 3K Weave Carbon Fiber
- Gripper Clamping Area
- Impact-Resistant Clear Coat
- Water Decals
SPECIFICATIONS:
- 3 Inch 4.5 Inch 6 Inch
- Clamp (Ø) 22.2mm
- Material UD Carbon Fiber
- Sweep 6° back, 2° up 6° back, 2° up 7° back, 2° up
- Weight 166 grams / 5.9 ounces 204 grams / 7.2 ounces 288 grams / 10.2 ounces
- Width 21.5 inches 23.6 inches 26 inches
Please note, the maximum recommended rider weight for these bars is 100 pounds.

$79.99
A little more upsweep for more comfort and a little taller than BSD's Giraffic. A classic two piece bar styling but still with the same Giraffic look.

$20.99
- Traditional trekking 35-degree back sweep handlebar
- 6061-T6 polished aluminum with clear anodize or black anodize finish
- RIDE+ versions have an integrated cable guide inside

$25.00
- Traditional trekking 20-degree back sweep handlebar
- 6061-T6 polished aluminum with clear anodize or black anodize finish
- RIDE+ versions have an integrated cable guide inside

$41.99
Genuine replacement parts
Get back on the road with a genuine replacement headset.
Designed for use with internal cable routing
- Includes lower and upper bearing
- Includes headset compression ring
- Compression ring is stackable with Allant+ 9.9 / Zouma Supreme+ Top cap and Spacers

$51.99
The Bontrager Comp VR-S road bar offers a shorter drop and reach, while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints.
- Custom-butted, 6061-T6 alloy construction
- Variable Radius-Short (VR-S) bar shape features a shallow drop with shorter reach, optimized for riders who prefer a less aggressive posture
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control setup

$72.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- 40mm of cut marks on each side allow for easy width customization

$72.99
Feel the difference
The inForm Satellite Plus IsoZone system is the comprehensive defense against hand and wrist discomfort. By pairing integrated elastomer handlebar inserts with advanced ergonomic grips, this bar and grip combo reduces peak hand pressure by nearly 30% while reducing vibration and absorbing impact for a smoother, more enjoyable ride.
Product details
- Custom-butted, 6061-T6 alloy construction
- IsoZone elastomer inserts offer reduced upper body fatigue
- Performs best when combined with inForm IsoZone grips (included)
Specifications
- Backsweep: 9 deg.
- Upsweep: 4 deg.
- Material: Alloy
- Weight: 487g

$104.99
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance.
Integrated comfort
Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. This alloy bar features a Variable Radius Compact Flare (VR-CF) shape for extra room in the drops.
- Custom-butted, 6066-T6 alloy construction
- Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control setup

$104.99
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance.
Goodbye, chatter
Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit.
Product details
- Custom-butted, 6066-T6 alloy construction
- Confidently access brake levers while in the drops with our VR-SF shallow, flared drop and shorter reach design
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control set-up

$104.99
Bontrager's Elite VR-C handlebar is designed for high-performance handling, comfort, and confidence. The 6061-T6 aluminum alloy construction in a proven ergonomic compact shape helps you find comfort on all-day rides and chase down surprise attacks when you need to.
- Ultra-light custom-butted 7050 alloy construction
- Variable-Radius Compact (VR-C) design allows shorter reach and drop
- Compatible with clip-on aero bars
$104.99
A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain.
The bar with a flare for adventure
The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions.
Product details
- 13-degree flare allows for more control in the drops
- Custom-butted, lightweight 6061-T6 alloy construction
- Shorter reach and wider flare allows for confident handling and easy access to controls
- Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
- Laser-etched brake lever position lines for spot-on control setup
- Compatible with clip-on aero bars

$135.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- OCLV Carbon construction is the benchmark for durability and light weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- 40mm of cut marks on each side allow for easy width customization

$188.99
Trek's lightest MTB handlebar offers an oversized 35mm clamp diameter that adds strength and saves weight.
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- OCLV Carbon construction is the benchmark for durability and light weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- Trim Lines allow personalized fit

$340.99
Unparalleled comfort
A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions.
Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar.
- OCLV carbon with IsoCore continuous inner-laminar technology
- Replaceable IsoZone EVA pads maintain original grip diameter
- Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions
- IsoCore technology decreases road vibration by 20% over traditional carbon bars
- Compatible with clip-on aero bars
- Includes four replaceable EVA IsoZone pads for tops and drops
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing

$340.99
A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a shallow-flared drop and shorter-reach design.
All-road comfort
Take on longer rides and rougher roads with the Pro IsoCore road handlebars, which can cut road vibration by 20% for a more comfortable, less-fatiguing ride on all-day gran fondos and gravel. Together, the IsoCore inner-laminar technology and IsoZone padding virtually eliminate road chatter. This OCLV Carbon bar features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction.
- OCLV Carbon with IsoCore continuous inner-laminar technology
- Replaceable IsoZone EVA pads maintain original grip diameter
- Confidently access brake levers while in the drops with the shorter reach and Variable Radius Shallow Flare (VR-SF) design
- IsoCore technology decreases road vibration by 20% over traditional carbon bars
- Compatible with clip-on aero bars
- Includes two replaceable EVA IsoZone top-of-bar pads
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing

$599.99
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you.
- Compatible with model year 2016/17 Madone
- Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops
- 100% OCLV carbon fiber construction
- Seamless accessory integration with Blendr
- Blendr accessory bases and mounts sold separately

$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$18.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: IS52/40/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Polymer
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide
• Material: N/A
• Weight: 35.35g

$25.50
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 62.79g

$25.50
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: ZS56/40/H4/K
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Polymer
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 35.35g

$30.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: N/A
• Weight: 72g

$30.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

$33.99 - $44.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height.
- Sealed black oxide bearings
- Steel crown race with integrated seals
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$36.00 - $36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS42/28.6/H9/K|IS42/30/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 42.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 72g

$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g

$39.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

$43.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$44.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.

$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS41/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 41.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 24.91g
Page 1 of 10
Next page