Filter By:
- Accessories (64)
- Helmets (2)
- Show More Brands
- Show Fewer Brands
Lights

ANT+ wireless capability lets you control Ion 450 RT's CREE LED optics and focused beam pattern on the fly. The Ion 450 R front bike light is a daytime running light with the flash, focus, and range to be seen from up to 2km during the day. The Quick Connect bracket makes Ion 450 RT easy to remove for charging with the included USB cable.
- ANT+ enabled for use with all Transmitr products
- Use Transmitr for wireless on/off, battery status, high beams and mode selection
- Ideal for helmet or handlebar mount
- 450 Lumens via high-power CREE LED
- 450LM: 1.5hrs, 200LM: 3hrs, 100LM: 6hrs, Night Flash: 9hrs, Day Flash: 10hrs
- Fully charges in 4 hours through sealed Micro USB port
- Includes quick connect bracket and micro USB charging cable
- Blendr compatible, secure bar mount available

$2.99
Key features
- Reflector mount for first and second generation Speed Concept seatposts
- To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)

$3.49
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

$3.99
Product details
- Replacement mounting strap for Bontrager Glo and Ember lights
- Silicone strap allows for quick installation and removal of light
- Fits 22.2 – 31.8mm handlebars, seatposts, and much more

$4.99
Product details
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage

$4.99
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g

$5.00
Quick, easy straps for your Flare and Ion lights
Product details (Front - Ion)
- Fits all Ion headlights
- Works best with 22.2 - 35.0mm handlebars
Product details (Rear - Flare)
- Fits all Flare tail lights
- Works best with 27.2 - 31.6mm seatposts
- Includes 16 degree offset for optimized use on seatposts

$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long

$7.00
Product details
- Compatible with USB rechargeable Flare taillights and all Ion headlights
- Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps
- Silicone body with a tooled adjustment clamp diameter
- When rotated for a Flare, the bracket is angled to compensate for an angled seat tube
- 25g

$9.99
Product details
- Easily integrate your Bontrager Flare tail light on your Madone 9 Series
- Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

$9.99
Key features:
- Replacement InnerGlo LED light strips for select Bontrager Town clothing
- Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants
- Sold individually

$9.99
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

$10.00
Key features:
- Securely attaches all Ion lights to bars
- Reduces vibration and slippage
- Compatible with 22.2-31.8mm diameter bars
- Mount rotates left and right for optimal placement

$10.00
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts.
- Fits standard and aero seatposts
System Compatibility:
- Sentinel
- Solas
- Sabre
- CherryBomb

$14.99
The ultra-bright pulsing safety light
The Lightweight and compact safety beacon is easily clipped to clothing, pets, bikes, strollers, etc. for increases viability, day or night. Simply recharges with built in USB.
- +20 hours run-time
- 1/2 Mile Visibility Distance
- Pulsing and Constant Modes
- USB Rechargeable, 0 to 100 in 45 minutes

$15.00
Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace.
- 20 lumen front light
- Versatile silicone mounting system
- Waterproof to IP-65 standard

$15.00
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride.
- Blendr mount allows for integrated rear light attachment
- Easily and securely mounts to compatible saddles
- Includes mounting hardware (2—3mm M5 bolt)
- Torque included M5 mounting hardware to 2Nm

$15.00
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want.
- Five red LEDs
- Steady, blinking and dance modes
- Stayputnik mount included
- Runs on 2xAAA batteries (included)
- Weatherproof exterior for all season riding
- Weight: 45 g (1.6 oz)

$15.00
- Single super bright LED safety light
- USB rechargeable - cable included
- Low battery indicator
- Short 2.5-3 hour charge time with indicator light
- Quick and easy to use silicone band attachment
- 2 modes - Steady and flash
- Lumens: 35

$15.00
- Single super bright LED safety light
- USB rechargeable - cable included
- Low battery indicator
- Short 2.5-3 hour charge time with indicator light
- Quick and easy to use silicone band attachment
- 2 modes - Steady and flash
- Lumens: 8

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

$20.00
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

$20.00
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$20.00
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$21.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote.
The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm.
- CNC alloy design provides light and stable mount
- Allows for infinite angle adjustment
- Compatible with 31.8mm - 22.2mm bars
- For use with Transmitr Wireless Remote

$25.00
Safely ride into the night with light sets from Bontrager, all featuring 270 degrees of visibility and steady and flash modes.
- Set includes: Glo headlight, Ember taillight and 2 silicone straps
- Each set includes lights with focused optics and over 270 degrees of visibility
Glo
Instantly add safety lighting with the Glo headlight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact, bright and stylish lights can be run in either steady or flashing modes and provide over 40 hours of run time. Elastic bands add versatility.
- Be seen with Bontrager's focused optics and over 270 degrees of visibility
- One bright white and environmentally-friendly LED
- Features steady and strobe-flash modes
- Run time of 40+ hours via two 2032 batteries (included)
- Includes silicone strap for quick installation on handlebars, seatposts, and more
Ember
Instantly add a burst of visibility to the rear of your bike with the Ember taillight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact and stylish lights provide key visibility with steady or flashing modes and provide over 40 hours of run time.
Ember Multi-Use Lights include two CR2032 batteries and an elastic strap for attachment to a variety of surfaces including helmets.
- Be seen with Bontrager's focused optics and over 270 degrees of visibility
- Features steady and strobe-flash modes
- Run time of 45+ hours via two 2032 batteries (included)
- Includes silicone trap for quick installation on handlebars, seatposts, compatible shoes, and more
$25.00
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night.
- 5-LEDs
- 4 modes (flashing, constant, chasing & random)
- Includes: (1) Red Light & (2) AAA Batteries
- Compatible with Burley trailers using a Light Bracket or Light Loop
Page 1 of 3
Next page