Getting the most out of mountain bikes requires leverage and proper positioning, and that's where a wide, low bar comes in. Specialized's S-Works DH Carbon Handlebar is wide, light, and stiff. It's crafted from Specialized's FACT carbon for minimal weight plus maximum strength and stiffness. Get the most out of your bike, go wide.
Whisky's No.9 12f is their most versatile carbon drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Rise Handlebar. - 5 Degree Upsweep - 9 Degree Backsweep - Trimmable ends - Matte UD full carbon construction - 258 grams
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
The Specialized S-Works DH Carbon Handlebars are one seriously strong, but lightweight bar that will give the rider every advantage they can get with no compromise. - Specialized's widest, toughest FACT carbon bar for optimized blend of high durability and light weight. - Rise: 38mm (1.5") - Width: 780mm length - Bend: 6-degree upsweep, 8-degree backsweep - Clamp Diameter: Oversized 31.8mm
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from Specialized's Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach
- DH Race tuned award winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - MATERIAL: MGR Super 6 Alloy - WEIGHT (g): ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 800 (adjustable to 740) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's new Service Course bars, at 128mm of drop. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. The SL-70's flattened top provides a better fit to the hand and is clip compatible. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 0° - Drop shape Variable - Clamp width 120mm
The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Integrated brake and shift cable routing (Also for Shimano Di2) - Weight: 595g
The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Perfectly match with Missile EVO clip-on aero extenders - Including 4 spacer adapters for under bar and top bar mounting - Ideally paired with the Missile EVO stem for optimal aerodynamics and optics - Weight: 295g
With ergonomic flat tops and easy-to-reach drops, Zipp’s Service Course SL-70 Ergo bars ensure comfort and control for every hand position. A short reach to the brake hoods and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Get low with Zipp’s Service Course SL-88 bars. Their longer reach provides an extra aero advantage in the drops, and because they’re angled outwards by 3 degrees, your wrists remain in a strong, natural position. The ends of the drops are flat to reach straight down upon; this also helps keep your hands locked in place during sprints. Zipp paid attention to detail and crafted the transition from brake hood to the tops perfectly, ensuring a comfortable, ergonomic position wherever you choose to grasp. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
The flat +/-5mm bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. - Double Butted 6061 Alloy Construction - +/-5mm rise - Width / Sweep: 720mm / 9 degrees - BB Black Finish - 276g
Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g
The same compact reach and drop dimensions as the Service Course SL-70 with a flattened top section for a natural ergonomic grip on the bar tops. A revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with a short reach to control levers vital for race situations. The bar's 70mm reach is the shortest of Zipp's new Service Course lineup. Its 128mm drop helps put the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 3° - Drop shape Variable - Clamp width: 110mm
An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions. - UD carbon construction - Integrated brake and shift cable routing (Also for Shimano Di2) - Anatomic and compact design
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
The Pro Vibe Aero handlebar is built to meet cycling’s highest demands using state of the art technology. It's an ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions and is designed with aerofoil shapes to give you a performance edge on the road. The Vibe Aero is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. - Full UD Carbon aerodynamic design that meets UCI requirements - Integrated brake, shift, and Di2 cable routing
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included. Specifications: - Material: Aluminum - Clamp Diameter: 31.8mm - Width: 42cm, 45cm, or 48cm - Rise: 30mm - Sweep Angle: 12 degrees - Color: E.D. coated black
The Bontrager Race VR-C offers a compact design and slightly shallower drop while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints. - Custom-butted, 6061-T6 alloy construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Compatible with clip-on aero bars - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano R1 Bull handlebar optimizes your position for race day performance.
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
- Road/Touring/Cross bar with a unique slight backward sweep on the tops - Flat area behind the lever position prevents hands from sliding forward - 4 degree flared drops (width does not include the flares). No grooves - 335-345g: all Nitto bars are measured center to center - 140mm drop - 96mm reach
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
Page 1 of 7 Next page