Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$64.99 - $65.00
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Bontrager's Race Lite Stem is a reliable race-ready tiller worthy of the finest road and mountain machines. Thanks to its one-piece, cold-forged 6061-T6 aluminum construction, it's strong, light and stiff. The 4-bolt faceplate is ultra tough and evenly distributes clamping forces your bars. And, the angled, opposing-bolt steerer clamp is safe, secure and compatible with carbon steerers.
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)
Basic, clean, and dependable performance – that’s FSA's Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer’s shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - Stack Height: 40mm - Weight: 154g
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.
Oversized diameter 35 mm stem accessible to all mountain riders. Oversized and in control Equip your whip with this 35mm Line stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this 0-degree stem provides the increased strength of the latest mountain-specific bar diameter. Product details - Oversized 35mm clamp diameter provides a new level of strength and weight savings - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
The Koryak Di2 stem is ideal for AM, Trail, and XC. It's 3D forged with AL-7075 aluminum for a strong and lightweight stem, and has a headlock system for a secure front clamp fixation. The Koryak stem is ready to hit the trail.
the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Page 1 of 5 Next page