Sick of a cluttered cockpit? Clean up that handlebar with the Blendr Elite kit, compatible with all Bontrager Elite stems. - Accessory mounts for Blendr equipped stems - Elite Stem kit includes mounts for Ion light and Trip computer
Party in the front and in the back One light set for a complete daytime running lights solution. The Ion 100 R and Flare R City feature focused optics, an interruptive flash pattern, and broad range to ensure visibility. Their compact design and wide beam spread are optimized for city riding and make these USB rechargeable lights great for any bike. - Be seen with a broad, powerful beam and balanced optics designed for city riding - USB rechargeable - Includes Ion 100R, Flare R City, two quick connect brackets, and a micro USB charging cable
- 20 Super Bright Red Cob LEDS - 4 Modes: High (1.5Hrs), Mid (4.5Hrs), Flash (5Hrs), Patrol (5Hrs) - Li-Ion Rechargeable Battery With Easy Magnetic USB Charger (1.5 Hrs Charge Time) - 20 Lumens - Waterproof - Optional Integrated Mount Designs For Giant Headsets, Overdrive1/Overdrive2 And Seatpost
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
Crank out those night laps and charge hard on technical trails with NiteRider's Pro 1400 Race on your helmet or handlebars. The power-to-weight ratio is astounding with a ton of light—1400 lumens—that illuminates everything on the trail. At barely over a pound, the lightweight 1400 runs from 1.75 to 24 hours and is powered by a Lithium-ion battery which recharges in a quick five hours. Five steady light modes (High, Medium, Low, Race, and Walk) and three flashing modes (Flash, SOS, and Beacon) are all controlled by a switch on the light. Plus, the eight-step fuel gauge keeps you on top of battery life.
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
$4.99 $15.00 67% Savings
NiteRider's Lightning Bug 3.0 features three bright LEDs and three modes: high, low and flashing (for increased daytime visibility). It's all in a tiny, mount-almost-anywhere package that installs without tools.
Taillight Seat Stay Mount
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
- For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Simple operation with three super-bright LEDs make the RedBat your go-to taillight for being seen. Solid and flashing visibility options for day and night riding. - 3 LEDs under a red lens (1 lumen) - 4 functions: steady, flashing, chasing, random - 19–40mm diameter bracket - Also works clipped to a bag/waistband - 2 AAA batteries included - Runtimes/Modes: 70 hours in Solid mode, and 160-250 hours in Flashing mode
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
Page 1 of 7 Next page